Silent hydraulic pump station(dual-valve, triple-valve)

● Motor:1.5kw-15kw,3PH380v/220v
● Maximum flow rate:60LPM,submersible elevator screw pump
● Noise:≤ 45db
● Fuel tank: 35L, 55L,80L. Large-capacity fuel tanks can be customized according to specific needs
The submersible elevator screw pump used in this power unit is developed and produced by our companyWith a maximum working pressure of 80bar, it operates smoothly, greatly enhancing the comfort of theelevator.

Low-noise hydraulic pump station(dual-valve, triple-valve)

● Motor:1.5kw-15kw,3PH380v/220v
● Maximum flow rate:60LPM,submersible elevator screw pump
● Noise:≤ 60db
● Fuel tank: 35L, 55L,80L. Large-capacity fuel tanks can be customized according to specific needs
This is a product that is both most commonly used and offers the best cost-performance ratio, meetingthe needs ofmost customers.

Low-noise hydraulic pump station(proportional valve)

● Motor:1.5kw-15kw,3PH 380v/220v
● Maximum flowrate:60LPM
● Noise:≤ 60db
● The elevator descent is controlled by a proportional flow valve

● Fuel tank: 35L, 55L,80L. Large-capacity fuel tanks can be customized according to specific needs
This is a widely used product with a high cost-performance ratio. lt takes a proportional flow valve tocontrolthe descending speed of the elevator.

Silent hydraulic pump station(proportional valve)

● Motor:1.5kw-15kw,3PH 380v/220v
● Maximum flow rate:60LPM,submersible elevator screw pump

● Noise:≤ 45db
● He elevator descent is controlled by a proportional flow valveFuel tank: 35L, 55L, 80L. Large-capacity fuel tanks can be customized according to specific needs.

Silent hydraulic pump station(high-pressure, heavy-load model)

● Motor:1.5kw-15kw,3PH380V/220V
● Maximum flowrate:80LPM
● Noise:≤ 50db
● Fuel tank: 35L, 55L,80L.Large-capacity fuel tanks can be customized according to specific needs
This power unit incorporates a helical gear pump developed by our company, featuring low noise, minimapulsation, and high working pressure. The maximum working pressure can reach 160bar.

Accessible elevator pump station

● Power supply voltage: AC220V,50Hz/60Hz

● Motor:1.5kw-2.2kw,1PH220v

● Maximum flow rate:14LPM,low-noise blade pump

● Noise:≤ 55db
● Fueltank:25L,35L,55L
Main applications: barrier-free lifts, simple household elevators.

New product display, replacing EV100

For more hydraulic power units, please consult our engineers.

● There are two types of screws. The screw type is mainly used in developed countries, especially in North America, the European Union, Australia and other places. It is widely used by users. The oil flow is smooth, the elevator runs smoothly, and the noise is low. The screw needs to be produced in a constant temperature workshop (23-24℃) to ensure cutting accuracy.

● Valves mainly include: two valves, three valves, and proportional valves. Some villa elevators in East use proportional valves. The advantage is that manual switches are not required during maintenance. Other optional valves include.

● Pressure-keeping valve: When the power is suddenly cut off, the elevator can stop nearby without getting stuck;

● Explosion-proof valve: To prevent the oil pipe from bursting, EN81 certification is required. The installation location is the connection between the car and the oil pipe;

● Loose rope valve: When the elevator is at the base, the wire rope or wire sheet is in a loose state. The loose rope valve can effectively prevent the wire rope from getting stuck elsewhere.

● The oil pipe is usually equipped with 2.5 meters.